I have been using a 3G wireless Internet device to connect to the Internet. This connected to one computer has been sufficient for my needs. However, recently I purchased a new Blu-ray player which will connect to a wireless network. I purchased a wireless router with it so I could connect to my computer, which is set up as a DVR, to watch recorded TV shows. I now have a home network without Internet available to the network. I decided to share the 3G Internet connection on the network. I used the Windows help and Google searches to find how to set this up. I did not find anything that gave good detailed description on how to do this. I ended up trying a few things until I found the setup that works. This is how I setup my system:

What you need:

  1. Network Router.

  2. Computer with 3G or dial-up connection with at least 2 Ethernet ports.

  3. Two Ethernet cables.

Note: Sharing the Internet connection makes one of the Ethernet ports unusable for connecting to the regular network.

Setting up:

Note: It is assumed that your router has been setup as your home network DHCP server, and that your dial-up connection is setup.

Hardware:

  1. Connect one of the Ethernet ports on your computer to the “Internet” port on your router.

  2. Connect the other Ethernet port on your computer to one of the other free ports on your router.

Configuration:

  1. Open “Network Connections.”

  2. Open “Properties” on the dial-up connection you want to share.

  3. Select the “Sharing” tab.

  4. Check “Allow other network users to connect through this computer’s Internet connection”

  5. Select in the “Home networking connection:” the network connection that corresponds to the Ethernet port you connected to the router’s Internet port.

  6. Click “OK”.

    Note: Windows configures the network adapter to use a static IP address of 192.168.137.1

  7. Open your router’s configuration page.

  8. Navigate to the Internet setup section.

  9. Select Static IP for the Internet connection type.

    Note: The Internet IP Address must be in the same Subnet as the Default Gateway. The Default Gateway must be the same as the IP address assigned to the network adapter used to share the Internet connection.

  10. Use 192.168.137.2 for the Internet IP Address.

  11. Use 255.255.255.0 for the Subnet Mask.

  12. Use 192.168.137.1 for the Default Gateway.

  13. Fill in the DNS 1. I used the Google DNS 8.8.8.8. Any valid DNS will work.

  14. Enable DHCP Server.
  15. The start IP address should be something reasonably below the max value allowed, (I believe that to be 255).
  16. The max users should be a reasonable for the number of network devices that will be connecting to your network through the router and automatically obtaining an IP address.

    Note: The default settings for the start IP address and Max users are what I use, and they usually will be fine for most situations.

  17. Save these settings.

Your Internet connection is now shared to all computers that connect to your router.

Dial-up connections are slow. Sharing this connection among several computers is not an ideal setup. I will be getting broadband Internet as soon as I can, but until then this setup will allow any device or computer on my network that needs an Internet connection to connect to the Internet. It isn’t good for gaming, or streaming videos. If I decide to get a 4G internet device I may continue with this setup. 4G supposedly has about a 6Mbs download which is comparable to an ok DSL speed.